Ruger 57 Problems [& How To Fix Them!]

If you are a new owner of the Ruger 57 and facing some problems, you are not the first one and won’t be the last one. Ruger has managed to make a really good gun with the 57. But they couldn’t make it the “perfect” weapon.

Far from it actually! I can and I will still recommend the 57 but that doesn’t mean I will hide the problems with the weapon with you guys! There are some known and some relatively unknown/QC-related issues present with the weapon.

So, what are the Ruger 57 problems that you need to keep in mind? Glad you asked. Down below, I will try my best to share the problems I have seen with the gun and what are their potential solutions. Let’s start!

Ruger 57 Problems: Common Issues and Solutions

The Ruger 57 has gained popularity among firearm enthusiasts due to its unique design, powerful ammunition, and exceptional performance. However, like any firearm, the Ruger 57 is not immune to problems. Let me provide you with effective solutions to address these problems.

1. Failure to Feed

One of the frustrating issues that Ruger 57 owners may encounter is the firearm’s failure to feed properly. This can result in misfires or, even worse, a complete stoppage of the gun’s operation. Here are a few potential causes and solutions for this problem:

Magazine Issues:

• Ensure that the magazine is properly seated and locked in place.
• Clean the magazine to remove any dirt or debris that may affect the feeding mechanism.
• Consider using high-quality ammunition that is known to reliably feed in the Ruger 57

Recoil Spring:

• The recoil spring may need to be replaced if it becomes worn or weakened over time.
• Contact Ruger customer support or a qualified gunsmith for replacement and installation.

Ammunition:

• Check the ammunition for any signs of damage or deformation before loading it into the firearm.
• Avoid using reloaded or low-quality ammunition, as these may not feed reliably.

2. Slide Issues

Another common problem that some Ruger 57 owners face relates to issues with the slide. The slide is responsible for cycling the firearm and must move smoothly for consistent and reliable operation. Here are a few troubleshooting steps to address common slide issues:

Stiff Slide:

• Apply a small amount of quality gun lubricant to the slide rails and contact points.
• Cycle the slide back and forth several times to distribute the lubricant and improve the slide’s movement.

Slide Lock Back:

• If the slide fails to lock back after firing the last round, check for an obstruction or debris in the slide lock mechanism.
• Clean the slide lock and ensure it moves freely without any obstructions.

Slide Not Fully Returning Forward:

• Clean and lubricate the recoil spring assembly.
• Check for any signs of damage or wear on the recoil spring, replacing if necessary.

3. Accuracy Issues

While the Ruger 57 is known for its accuracy, some shooters may experience issues with maintaining consistent shot placement. Here’s what you can do to troubleshoot and improve accuracy:

Gripping Technique:

• Ensure you have a firm and consistent grip on the firearm.
• Experiment with different grip styles to find the one that provides the most stability and control.

Sight Adjustment:

• Check the alignment of the sights and adjust them as needed.
• You can refer to the Ruger 57 user manual for instructions on sight adjustment or seek assistance from a qualified gunsmith.

Shooting Fundamentals:

• Practice proper shooting techniques, including breath control, trigger control, and sight alignment.
• Consider taking a shooting course or seeking guidance from an experienced shooter to improve your technique.

4. Extraction and Ejection Problems

Problems with extraction and ejection can be frustrating and affect the overall reliability of the Ruger 57. Here are some possible causes and solutions for these issues:

Dirty Chamber:

• Clean the chamber to remove any carbon buildup or debris that may hinder extraction.
• Use a chamber brush and cleaning solvent to thoroughly clean the chamber.

Ejector Issues:

• Inspect the ejector for any signs of damage or wear.
• Contact Ruger customer support or a qualified gunsmith for replacement if necessary.

Ammunition Factors:

• Ensure you are using factory ammunition that complies with SAAMI specifications.
• Avoid using reloaded or hot-handloaded ammunition, as these may cause extraction and ejection issues.

5. Safety Concerns

While independent reports confirm the Ruger 57’s overall safety, it’s essential to address any potential safety concerns that may arise. If you encounter any unexpected behavior or malfunctions, the following steps can help mitigate safety risks:

Cease Firing:

• Immediately stop using the firearm if you encounter any abnormal behavior or concerns regarding its safety.

Contact Ruger Customer Support:

• Reach out to Ruger customer support to report the issue and seek their guidance.
• Ruger has a strong reputation for customer service and will provide assistance in addressing any potential safety concerns.

Consulting a Gunsmith:

• If the problem persists or you are unsure about the firearm’s safety, consult a qualified gunsmith.
• A gunsmith will have the necessary expertise to diagnose and resolve any safety-related issues.

Keep In Mind

While the Ruger 57 is a reliable and innovative firearm, it is not immune to problems.

By following the troubleshooting steps outlined above and seeking professional assistance when required, you can address these problems effectively and continue enjoying the Ruger 57’s exceptional performance.

Frequently Asked Questions

1. Why is my Ruger 57 experiencing feeding issues?

The Ruger 57 may experience feeding issues due to improper magazine loading, weak magazine springs, or ammunition problems. Ensure proper loading techniques and consider trying different ammunition brands to troubleshoot this problem.

2. What can I do if my Ruger 57 has a slide that fails to lock back on an empty magazine?

To address the slide not locking back, make sure you have a firm grip on the firearm and avoid inadvertently placing pressure on the slide stop. Additionally, check if the magazine follower or slide stop spring needs cleaning or replacement.

3. Why is the trigger on my Ruger 57 gritty or stiff?

If the trigger feels gritty or stiff, it may require cleaning or lubrication. Disassemble the pistol, clean the trigger mechanism components, and apply an appropriate lubricant to ensure smooth operation.

4. What is causing the ejection issues with my Ruger 57?

Ejection problems may occur due to weak ammunition or an improperly cleaned or lubricated firearm. Check for debris or fouling in the ejection port, and ensure that the pistol is adequately cleaned and lubricated.

5. How can I address any accuracy problems with my Ruger 57?

If you are experiencing accuracy issues, start by examining your grip and shooting technique. Additionally, ensure that the firearm is properly maintained and cleaned, and consider using premium ammunition for optimal performance.

Final Thoughts

The Ruger 57 poses some notable challenges. While its impressive design and powerful performance have garnered attention, there are inherent problems that users should be aware of. These issues include concerns regarding magazine disassembly, frequent misfires, and limited aftermarket support.

Despite its potential, the Ruger 57’s problems cannot be overlooked. It is important for prospective buyers to carefully consider these limitations and assess whether they outweigh the firearm’s positive attributes.

Seeking advice from experienced shooters and conducting thorough research are crucial steps before making a purchasing decision. While the Ruger 57 may offer exciting features, its problems should not be ignored.